시험패스가능한NSE7_PBC-7.2덤프최신덤프공부

만약 아직도Fortinet NSE7_PBC-7.2인증시험 위하여 많은 시간과 정력을 소모하며 열심히 공부하고 있습니까? 아직도 어덯게하면Fortinet NSE7_PBC-7.2인증시험을 빠르게 취득할 수 있는 방법을 못찿고 계십니까? 지금Pass4Test에서Fortinet NSE7_PBC-7.2인증시험을 안전하게 넘을 수 있도록 대책을 내드리겠습니다. 아주 신기한 효과가 있을 것입니다.

Fortinet NSE7_PBC-7.2 시험요강:

주제	소개
주제 1	Troubleshooting and FortiCNP: This section focuses on problem-solving strategies for various cloud-related issues. It covers methods to tackle connectivity problems with AWS EC2 instances, approaches to resolving SD-WAN connection difficulties, and techniques for identifying and rectifying issues related to Azure SDN connectors. Additionally, it explores how to effectively use FortiCNP to detect and mitigate potential security risks in cloud environments.
주제 2	Deploying FortiGate-VM with automation tools: In this area of the exam, aspiring Fortinet network and security professionals learn about deploying Fortinet solutions in AWS and Azure using Terraform. Moroever, they get knowledge about configuring HA solutions in Azure.
주제 3	Automation: In this section, candidates are tested for their knowledge of foundational elements needed for automation processes, the implementation of Terraform and Ansible for deployment purposes, and an overview of crucial Azure security principles. It also delves into the routing complexities and constraints within public cloud ecosystems, methods for deploying FortiGate-VM instances using automation tools, and techniques for leveraging Terraform to set up Fortinet solutions in both AWS and Azure environments.
주제 4	FortiGate deployments in the public cloud: This section covers how to recognize various FortiGate solutions available for public cloud environments, implement transit VPC and transit gateway architectures, and explore Fortinet's offerings for container security.

>> NSE7_PBC-7.2덤프 <<

NSE7_PBC-7.2시험패스 가능한 공부자료 & NSE7_PBC-7.2퍼펙트 최신 덤프

IT인증시험덤프자료를 제공해드리는 사이트는 너무나도 많습니다. 그중에서 대부분 분들이Pass4Test제품에 많은 관심과 사랑을 주고 계시는데 그 원인은 무엇일가요?바로Pass4Test에서 제공해드리는 덤프자료 품질이 제일 좋고 업데이트가 제일 빠르고 가격이 제일 저렴하고 구매후 서비스가 제일 훌륭하다는 점에 있습니다. Pass4Test 표 Fortinet인증NSE7_PBC-7.2덤프를 공부하시면 시험보는데 자신감이 생기고 시험불합격에 대한 우려도 줄어들것입니다.

최신 NSE 7 Network Security Architect NSE7_PBC-7.2 무료샘플문제 (Q34-Q39):

질문 # 34
You are tasked with deploying a FortiGate HA solution in Amazon Web Services (AWS) using Terraform What are two steps you must take to complete this deployment? (Choose two.)

A. Enable automation on the AWS portal.
B. Use CloudSheIl to install Terraform.
C. Create an AWS Identity and Access Management (IAM) user With permissions.
D. Create an AWS Active Directory user with permissions.

정답：B,C

설명：
Explanation
To deploy a FortiGate HA solution in AWS using Terraform, you need to create an AWS IAM user with permissions to access the AWS resources and services required by the FortiGate-VM. You also need to use CloudShell to install Terraform, which is a tool for building, changing, and versioning infrastructure as code.
References:
Deploying FortiGate-VM using Terraform | AWS Administration Guide
Setting up IAM roles | AWS Administration Guide
Launching the instance using roles and user data | AWS Administration Guide Terraform by HashiCorp

질문 # 35
A customer would like to use FortiGate fabric integration With FortiCNP When configuring a FortiGate VM to add to FortiCNP, which three mandatory configuration steps must you follow on FortiGate? (Choose three.)

A. Create an SSL]SSH inspection profile.
B. Create an IPsec tunnel.
C. Create and IPS sensor and a firewall policy
D. Enable two-factor authentication.
E. Enable send logs-

정답：A,C,E

설명：
To configure a FortiGate VM to add to FortiCNP, you need to perform three steps on FortiGate:
* Enable send logs in FortiGate to allow FortiCNP to receive the IPS logs from FortiGate.
* Create an SSL/SSH inspection profile on FortiGate to inspect the encrypted traffic and apply IPS protection.
* Create an IPS sensor and a firewall policy on FortiGate to enable IPS detection and prevention for the traffic.
References:
* FortiCNP 22.4.a Administration Guide, page 22-24
* FortiGate IPS Administration Guide, page 9-10

질문 # 36
Refer to the exhibit. You deployed an HA active-active load balance sandwich with two FortiGate VMs in Microsoft Azure. After the deployment, you prefer to use FGSP to synchronize sessions, and allow asymmetric return traffic In the environment, FortiGate port 1 and port 2 are facing external and internal load balancers respectively What IP address must you use in the peerip configuration?

A. The opposite FortiGate port 2 IP address.
B. The internal load balancer port 1 IP address.
C. The opposite FortiGate port 1 IP address.
D. The public load balancer port 2 IP address

정답：A

설명：
In an HA active-active load balance configuration with FortiGate VMs, especially in Microsoft Azure where FGSP (FortiGate Session Life Support Protocol) is used for session synchronization, the correct configuration for the peerip is: D. The opposite FortiGate port 2 IP address.
HA Synchronization Requirements: FGSP requires direct communication between the FortiGates to synchronize the session table. This synchronization typically occurs over a dedicated HA link that connects the HA pair.
Asymmetric Traffic Considerations: FGSP allows asymmetric traffic to rejoin the correct session by synchronizing session information, including NAT and TCP sequence tracking between the FortiGate units in a cluster.
Configuration Specifics: For port 2, which is facing the internal load balancer, the peerip should be set to the corresponding port 2 IP address of the opposite FortiGate. This allows the internal interfaces to communicate directly with each other for session synchronization purposes, which is crucial in an active-active deployment to ensure sessions persist during failover scenarios.

질문 # 37
Refer to the exhibit. A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Linux1 and Linux2 instances to the internet through the security VPC (virtual private cloud). The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface. Assume there are no issues with the Transit Gateway (TGW) configuration.

Which two settings must the customer add to correct the issue? (Choose two.)

A. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the TGW
B. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
C. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the Internet Gateway (IOW).
D. The four landing subnets in all the VPCs must have a 0.0.0.0/0 traffic route to the TGW

정답：A,B

설명：
The correct answer is B and C. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the TGW. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. To send outbound traffic from the Linux instances to the internet through the security VPC, you need to do the following steps:
In the main subnet routing table in the spoke VPCs, add a new route with destination 0.0.0.0/0, next hop TGW. This route directs all traffic from the Linux instances to the TGW, which can then forward it to the appropriate destination based on the TGW route table. In the main subnet routing table in the security VPC, add a new route with destination 0.0.0.0/0, next hop FortiGate port2.
This route directs all traffic from the TGW to the FortiGate internal interface, where it can be inspected and allowed by the FortiGate policies.

질문 # 38
When an organization deploys a FortiGate-VM in a high availability (HA) (active/active) architecture in Microsoft Azure, they need to determine the default timeout values of the load balancer probes.
In the event of failure, how long will Azure take to mark a FortiGate-VM as unhealthy, considering the default timeout values?

A. 16 seconds
B. 20 seconds
C. 30 seconds
D. Less than 10 seconds

정답：D

설명：
- If your application produces a time-out response just before the next probe arrives, the detection of the events will take 5 seconds plus the duration of the application time-out when the probe arrives. You can assume the detection to take slightly over 5 seconds.
- If your application produces a time-out response just after the next probe arrives, the detection of the events won't begin until the probe arrives and times out, plus another 5 seconds. You can assume the detection to take just under 10 seconds.
Assume the reaction to a time-out response will take a minimum of 5 seconds and a maximum of
10 seconds to react to the change.

질문 # 39
......

우리의 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. Pass4Test에서 제공하는Fortinet NSE7_PBC-7.2시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. Pass4Test는 여러분이 한번에Fortinet NSE7_PBC-7.2인증시험을 패스함을 보장 드립니다.

NSE7_PBC-7.2시험패스 가능한 공부자료: https://www.pass4test.net/NSE7_PBC-7.2.html